Servoy 5.1 rc 3

Release notes for Servoy betas

Re: Servoy 5.1 rc 3

Postby lwjwillemsen » Wed Feb 10, 2010 12:16 pm

jcompagner wrote:better would be a sample solution or something that demonstrates what you see.
A screen capture doesnt tell me anything.


A sample solution would involve our whole framework.
I was talking about a video (moving pictures) with a ok route and a not ok route on the same data and app. to demonstrate what we experience...
I also can toggle in that video our workaround on and off.

We received in the past a link from Sanneke for a nice (and free) video capture program...
Lambert Willemsen
Vision Development BV
lwjwillemsen
 
Posts: 566
Joined: Sat Mar 14, 2009 5:39 pm
Location: The Netherlands

Re: Servoy 5.1 rc 3

Postby jcompagner » Wed Feb 10, 2010 12:40 pm

problem is that i believe that it happens
But if i just see it then that doesnt tell me much
i have to look at the code and exactly know what foundset changes the form gets or not, what the state was of the form before you show it again.

But the best thing was if you just look what exactly happens and build a sample solution (that maybe just includes some modules of your normal solution)
with a few forms.
Johan Compagner
Servoy
User avatar
jcompagner
 
Posts: 7974
Joined: Tue May 27, 2003 7:26 pm
Location: The Internet

Re: Servoy 5.1 rc 3

Postby lwjwillemsen » Wed Feb 10, 2010 12:51 pm

jcompagner wrote:problem is that i believe that it happens
But if i just see it then that doesnt tell me much
i have to look at the code and exactly know what foundset changes the form gets or not, what the state was of the form before you show it again.

But the best thing was if you just look what exactly happens and build a sample solution (that maybe just includes some modules of your normal solution)
with a few forms.


Ok, Johan, thanks.

I am going to discuss internally what we will do. I am afraid it is gonna take too much of our time to build a sample solution...

Thanks again for your time and effort !
Lambert Willemsen
Vision Development BV
lwjwillemsen
 
Posts: 566
Joined: Sat Mar 14, 2009 5:39 pm
Location: The Netherlands

Re: Servoy 5.1 rc 3

Postby Marco R. » Thu Feb 11, 2010 12:14 pm

Hi at all,

I don't know if this post is the right place but I have a problem and I don't know if it has already been fixed (no track in previus post) with some of this Release Candidate.

Problem 1:
So,I have a form called 'main' with 3 tab_panel(tabs_left,tabs_up,tabs_middle). For each tab_panel I have built a SolutionModel form.(form_left,form_up,form_middle)
If I put the form middle in design mode and try to get the x position(in the dropEvent by JSEVENT.getX() ) of a button element than the value returned is wrong.In add if the button is in the position_x 0 and I try to move it up and down the position_x change(instead the only position_y)!

In attach a solution sample
test_drop.servoy
(4.19 KiB) Downloaded 149 times




Problem 2:
If I create a button by solutionModel and I assign it a number as NAME it's correctly created but if I try to point to it by a function like:
Code: Select all
//istance of global variable
globals.nameOfObject[1] = '1'
globals.nameOfObject[2] = '2'
globals.nameOfObject[3] = '3'

//build a form
.
.
.

//press a button and run this function
for(var i=1;i<=3;i++){
application.output(forms['myForm'].elements[globals.nameOfObject(i)].getLocationY())
}


At the third evaluation(i=3) the program go in error,and JSEVENT provides wrong informations.I'm sure that:
- the names in global_struct and the form-element-names are the same.
- the form is correctly initialized with three buttons named ['1','2','3']


Thanks in advance


Marco
(servoy 5.0.1 built 861,windows XP,java build 1.6.0_17-b04)
Marco Rossi
Freelance

Main development environment: Servoy 6.1.6 - 7.4.3, Java 1.6u45,7u71 Windows 7/CentOS
Marco R.
 
Posts: 203
Joined: Thu Mar 19, 2009 12:37 pm

Re: Servoy 5.1 rc 3

Postby lvostinar » Thu Feb 11, 2010 2:55 pm

Problem 1:


The coordinates from event (onDrop) is the mouse location when you release the mouse button (in the form's coordinate system). What are you trying to achieve with that info ?

Problem 2:


Which is the error you receive (full stack from log). I guess there is something more that triggers this.
Laurian Vostinar
Servoy
lvostinar
 
Posts: 1047
Joined: Tue Feb 19, 2008 10:53 am

Re: Servoy 5.1 rc 3

Postby Marco R. » Thu Feb 11, 2010 3:57 pm

problem 1:

Ok I have done a mistake,I have thinked that ".getLocationX()" and "getX()" returned the same X value(now using the first all work fine).In my mind I have imagined that work like the event 'onDataChange' that returned the new value (I don't know why I have thinked this ^^'' )

problem 2 :

linked to the needs of problem 1:
I have to point to the form-button because the buttons represent database data,so to establish a logical link I would to give myTable-progressive-id to the name property of my button.
For now I have round the problem by giving a prefix name like "data_"+_id.

Thanks for your time


Marco
Marco Rossi
Freelance

Main development environment: Servoy 6.1.6 - 7.4.3, Java 1.6u45,7u71 Windows 7/CentOS
Marco R.
 
Posts: 203
Joined: Thu Mar 19, 2009 12:37 pm

Re: Servoy 5.1 rc 3

Postby lvostinar » Thu Feb 11, 2010 4:06 pm

linked to the needs of problem 1:
I have to point to the form-button because the buttons represent database data,so to establish a logical link I would to give myTable-progressive-id to the name property of my button.
For now I have round the problem by giving a prefix name like "data_"+_id.


you also have getFormName and getElementName (also getSource) on the event; maybe these methods help you ?
Laurian Vostinar
Servoy
lvostinar
 
Posts: 1047
Joined: Tue Feb 19, 2008 10:53 am

Re: Servoy 5.1 rc 3

Postby Marco R. » Thu Feb 11, 2010 4:36 pm

you also have getFormName and getElementName (also getSource) on the event; maybe these methods help you ?


I already use these methods in this part of code:
Code: Select all
function onTaskDrop(_event) {
var _formName,_elementName,_newY,i

for(i in _event.data){
_formName = _event.getFormName()   
_elementName = _event.data[i].getName()
_newY = forms[_formName].elements[_elementName].getLocationY()
globals.saveNewY(_elementName,_newY)
}



during evaluation of
Code: Select all
_newY = forms[_formName].elements[_elementName].getLocationY()

the Client go in error.

I have modified the 'test_drop' solution to reproduce this case:
test_drop.servoy
(4.52 KiB) Downloaded 148 times


So try with this solution to move all the button,after some movement the client go in crash
Marco Rossi
Freelance

Main development environment: Servoy 6.1.6 - 7.4.3, Java 1.6u45,7u71 Windows 7/CentOS
Marco R.
 
Posts: 203
Joined: Thu Mar 19, 2009 12:37 pm

Re: Servoy 5.1 rc 3

Postby lvostinar » Thu Feb 11, 2010 5:05 pm

Ok, I see what happens, if you do
forms[_fName].elements[4] it will take the fifth element in the array of elements (which in this case doesn't exist, as there are only 4 elements). So , you should use another name, so that there is no confusion between index and name.
Laurian Vostinar
Servoy
lvostinar
 
Posts: 1047
Joined: Tue Feb 19, 2008 10:53 am

Re: Servoy 5.1 rc 3

Postby Marco R. » Fri Feb 12, 2010 12:41 pm

Hi,


I want to report that:

I have a solutionModel-form,than I put it in designMode.
I drag an object(es:button) from a point to another,but at the DROPevent I want to adjust its position by ".setLocation(x,y)".
Then the object is rightly moved,but the border-selection remains on the DROPlocation.

Can It be fixed?

Thanks in advance


Marco
Marco Rossi
Freelance

Main development environment: Servoy 6.1.6 - 7.4.3, Java 1.6u45,7u71 Windows 7/CentOS
Marco R.
 
Posts: 203
Joined: Thu Mar 19, 2009 12:37 pm

Re: Servoy 5.1 rc 3

Postby ROCLASI » Fri Feb 12, 2010 12:45 pm

Hi Marco,

Please also make a case in the Servoy support database:
http://www.servoy.com/s
Robert Ivens
ROCLASI Software Solutions / JBS Group, Partner
SAN Developer / Servoy Valued Professional / Servoy Certified Developer
Twitter: @roclasi / @servoyforge
--
ServoyForge - Building Open Source Software.
PostgreSQL - The world's most advanced open source database.
User avatar
ROCLASI
Servoy Expert
 
Posts: 5205
Joined: Thu Oct 02, 2003 9:49 am
Location: Netherlands/Belgium

Re: Servoy 5.1 rc 3

Postby martinh » Fri Feb 12, 2010 2:05 pm

I can't update from rc2 to rc3.

See screenshot. As you can see there is the -beta option in the commandline, but Servoy doesn't want to update and suggest ..... to add -beta to the commandline :?

Clipboard-1.gif
Clipboard-1.gif (7.09 KiB) Viewed 2419 times
Martin
------------------------------------------------
Servoy Developer
Version 5.2.10/5.2.13
Java version 1.6 update 31
Database SQL Server 2008 R2
martinh
 
Posts: 857
Joined: Wed May 09, 2007 5:34 pm
Location: Belgium

Re: Servoy 5.1 rc 3

Postby ROCLASI » Fri Feb 12, 2010 2:18 pm

Hi Martin,

Try it without all the other parameters.
Code: Select all
java -jar servoy_updater.jar -beta
Robert Ivens
ROCLASI Software Solutions / JBS Group, Partner
SAN Developer / Servoy Valued Professional / Servoy Certified Developer
Twitter: @roclasi / @servoyforge
--
ServoyForge - Building Open Source Software.
PostgreSQL - The world's most advanced open source database.
User avatar
ROCLASI
Servoy Expert
 
Posts: 5205
Joined: Thu Oct 02, 2003 9:49 am
Location: Netherlands/Belgium

Re: Servoy 5.1 rc 3

Postby martinh » Fri Feb 12, 2010 2:37 pm

ROCLASI wrote:Hi Martin,

Try it without all the other parameters.
Code: Select all
java -jar servoy_updater.jar -beta


Same problem ....
Martin
------------------------------------------------
Servoy Developer
Version 5.2.10/5.2.13
Java version 1.6 update 31
Database SQL Server 2008 R2
martinh
 
Posts: 857
Joined: Wed May 09, 2007 5:34 pm
Location: Belgium

Re: Servoy 5.1 rc 3

Postby Jan Blok » Fri Feb 12, 2010 3:20 pm

please try again, we corrected a server resolve issue, just yet
Jan Blok
Servoy
Jan Blok
 
Posts: 2684
Joined: Mon Jun 23, 2003 11:15 am
Location: Amsterdam

PreviousNext

Return to Latest Releases

Who is online

Users browsing this forum: No registered users and 2 guests