# batch processor normal behaviour ?

**URL:** <https://forum.servoy.com/t/batch-processor-normal-behaviour/16222>\
**Category:** Classic Servoy\
**Created:** [July 18, 2012, 5:13pm UTC](https://forum.servoy.com/t/batch-processor-normal-behaviour/16222 "2012-07-18T17:13:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hans\_Nieuwenhuis](https://avatars.discourse-cdn.com/v4/letter/h/87869e/32.png) [@Hans\_Nieuwenhuis](https://forum.servoy.com/u/Hans_Nieuwenhuis)\
**Post date:** [July 18, 2012, 5:13pm UTC](https://forum.servoy.com/t/batch-processor-normal-behaviour/16222/1 "2012-07-18T17:13:05Z")

</div>

Hi,

when I start my servoy server and add a batchprocesser client, there is not one entry  
but after a few refreshes of the admin page I see 5 entries for the same module on the page ( see attachment )

Why is this ?

Regards,

---

<div class="post-metadata">

**Author:** ![Hans\_Nieuwenhuis](https://avatars.discourse-cdn.com/v4/letter/h/87869e/32.png) [@Hans\_Nieuwenhuis](https://forum.servoy.com/u/Hans_Nieuwenhuis)\
**Post date:** [July 18, 2012, 5:39pm UTC](https://forum.servoy.com/t/batch-processor-normal-behaviour/16222/2 "2012-07-18T17:39:25Z")

</div>

This seems to happen when You add a batchprocessor, do not start it and then refresh the web page serveral times

If You start it, before You refresh the web page, there is only one batchprocessor on the page.

Tested this in 5.2.13 and 6.1