# Two different repositories on Application Sever????

**URL:** <https://forum.servoy.com/t/two-different-repositories-on-application-sever/4346>\
**Category:** Classic Servoy\
**Created:** [June 13, 2005, 2:29pm UTC](https://forum.servoy.com/t/two-different-repositories-on-application-sever/4346 "2005-06-13T14:29:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![r.schneider](https://avatars.discourse-cdn.com/v4/letter/r/57b2e6/32.png) [@r.schneider](https://forum.servoy.com/u/r.schneider)\
**Post date:** [June 13, 2005, 2:29pm UTC](https://forum.servoy.com/t/two-different-repositories-on-application-sever/4346/1 "2005-06-13T14:29:01Z")

</div>

Hi there,

I noticed something strange on my server.

I installed ServoyDeveloper on a Windows XP machine.  
Then I started the Developer and imported my solution.  
I closed the Developer and started the Servoy Application Server manually.  
After that I installed my licence keys.

So far so good.

On client machine I connected via my browser and started the Servoy Client. Everything is working.

I started Servoy Developer on the client machine and set the preferences database to the IP of my server instead of “localhost”.

I was able to make changes in a few forms. Then i started the client again and -oops- the changes were not there.

I started the Developer on the server and could saw the changes.

I started the Developer on my client maschine and could saw the changes.

Only the Servoy Client does not show my the right forms.

What is my mistake??? ![:?:]( "Question")

---

<div class="post-metadata">

**Author:** ![patrick](https://avatars.discourse-cdn.com/v4/letter/p/b2d939/32.png) [@patrick](https://forum.servoy.com/u/patrick)\
**Post date:** [June 13, 2005, 2:45pm UTC](https://forum.servoy.com/t/two-different-repositories-on-application-sever/4346/2 "2005-06-13T14:45:30Z")

</div>

If you start a server, the server loads the current release into memory. If you edit a solution in developer, those changes are not available to a client, because the solution the server has in mem is older.

To give a client the latest version, you can

- restart servoy server OR
- flush the solution (using [http://yourserver:yourport/servoy-admin/solutions](http://yourserver:yourport/servoy-admin/solutions))

Flushing the solution removes the solution from the Server’s memory. If the next client accesses the solution, the solution will be reloaded.

Hope this helps.

Patrick

---

<div class="post-metadata">

**Author:** ![r.schneider](https://avatars.discourse-cdn.com/v4/letter/r/57b2e6/32.png) [@r.schneider](https://forum.servoy.com/u/r.schneider)\
**Post date:** [June 13, 2005, 2:56pm UTC](https://forum.servoy.com/t/two-different-repositories-on-application-sever/4346/3 "2005-06-13T14:56:32Z")

</div>

Thank you.  
I will try it…

Cool, it works!