Servoy 2.2.1 Release Candidate 2

Release notes for Servoy betas

Servoy 2.2.1 Release Candidate 2

Postby Jan Blok » Tue Aug 23, 2005 4:35 pm

We announce the immediate availability of Servoy 2.2.1 Release Candidate 2
NOTE: this is pre release SOFTWARE, use with caution and make BACKUPS before you start.

Make a backup of your current Servoy installation directory if you plan to upgrade or perform a clean installation into a new directory.

This version is available through auto update (or manual update via help menu -> check for new version)

Enhancements and fixes:
[enh]-Minor JSArray changes in the tree (move code and improved example)
[enh]-Control/CMD 1-9 shortcut mappings to first nine global methods listed in the menu
[fix]-readonly form when used in tabpanels
[fix]-hang when using Tags in html to display a image with an empty source
[fix]-New/Copy/Delete table buttons disabled when in globals tab
[fix]-for scenario when foreign key is also table pk in related table
[fix]-Database ValueList Values where duplicated in specific cases
[fix]-this build works again with Java 1.4

Previous build info
Last edited by Jan Blok on Wed Sep 21, 2005 7:01 pm, edited 2 times in total.
Jan Blok
Servoy
Jan Blok
 
Posts: 2684
Joined: Mon Jun 23, 2003 11:15 am
Location: Amsterdam

Postby ApeWare » Thu Aug 25, 2005 3:34 pm

I am still unable to get Servoy to launch on Mac Panther (Java 1.4) or Tiger (Java 1.5). Worked fine before 2.2.1.

Corection, it WILL launch, and allow selection of solution and even login info, but after login info it sits with rotating Servoy logo. I can go to "Window" and select a form to show - and sometimes get the form to show - but the data will not display. The Servoy status shows as "ready".

Anyone else having Mac issues with this release or did the RC2 seem to fix the issue for you?
User avatar
ApeWare
 
Posts: 114
Joined: Sat Aug 28, 2004 11:49 am
Location: Richmond, VA

Postby grahamg » Thu Aug 25, 2005 3:47 pm

Apeware

Could you clarify - are you unable to load Developer or is it a problem with Client? I'm about to start testing this release on Windows but have couple of clients who are using Panther. Be nice to know the 'gotchas' in advance.

Thanks

Graham Greensall
Worxinfo Ltd
grahamg
 
Posts: 752
Joined: Fri Oct 03, 2003 3:15 pm
Location: Midlands UK

Postby pbakker » Thu Aug 25, 2005 4:42 pm

When i start up my Servoy 2.2 final Developer, I get notified that 2.2.1 RC2 is available. Is ther eno need to install 2.2.1 RC1 first?

Paul
pbakker
 
Posts: 2822
Joined: Wed Oct 01, 2003 8:12 pm
Location: Amsterdam, the Netherlands

Postby ROCLASI » Thu Aug 25, 2005 4:44 pm

It will download rc1 even though it tells you rc2 is available.
Odd behavior...
Robert Ivens
SAN Developer / Servoy Valued Professional / Servoy Certified Developer

ROCLASI Software Solutions / JBS Group, Partner
Mastodon: @roclasi
--
ServoyForge - Building Open Source Software.
PostgreSQL - The world's most advanced open source database.
User avatar
ROCLASI
Servoy Expert
 
Posts: 5438
Joined: Thu Oct 02, 2003 9:49 am
Location: Netherlands/Belgium

Postby Jan Blok » Thu Aug 25, 2005 7:53 pm

The release candidates are incremental
Jan Blok
Servoy
Jan Blok
 
Posts: 2684
Joined: Mon Jun 23, 2003 11:15 am
Location: Amsterdam

Postby ApeWare » Fri Aug 26, 2005 9:17 pm

grahamg,

I use a PC for development (runs better on PC). One of my clients is on a Mac and they were able to connect to servoy just fine before the last 2 RC's

I thought it was due to the compile issue (compileing Servoy with Java 1.5 which is only available to Tiger) but it still seems to be an issue.
User avatar
ApeWare
 
Posts: 114
Joined: Sat Aug 28, 2004 11:49 am
Location: Richmond, VA

Postby Jan Aleman » Mon Aug 29, 2005 11:28 am

Can you try deleting the Java webstart cache on the machines with problems? We run it on multiple mac's without problems.
Jan Aleman
Servoy
Jan Aleman
 
Posts: 2083
Joined: Wed Apr 23, 2003 9:49 pm
Location: Planet Earth

Postby ApeWare » Mon Aug 29, 2005 4:10 pm

Deleted the Java WebStart Cache - Tried on 2 machines - did not seem to correct the issue.

We are on 10.4.2 and 10.3.9 G4's. Servoy launches, askes for the solution to open, gives login dialog, then the logo just spins in the solution window while the status bar reads "Ready".

Again, this started after we went to 2.2.1 RC1 and was not fixed (for us) after 2.2.1 RC2.

Any other suggestions?
User avatar
ApeWare
 
Posts: 114
Joined: Sat Aug 28, 2004 11:49 am
Location: Richmond, VA

Postby dponti » Fri Sep 02, 2005 1:55 am

We noticed this problem using Servoy Version R2 2.2.1rc-build 330 - which we downloaded today (9/1/05). The broken java 1.4 problem was supposed to be fixed with this release (assuming this is rc2) but it doesn't look like it - at least not for Mac OSX. sdevlin posted on this problem today in the Issues and Bugs forum.

Try this:

1) Be sure that you have J2SE 5.0 installed with Tiger. It doesn't get installed automatically (at least not with ours) with just a system update. You can get the download from Apple at: http://www.apple.com/support/downloads/java2se50release1.html.

2) Just because you have this installed, it is not the default. Next go to the Java Preferences application (in /Applications/Utilities/Java/J2SE 5.0) and under the Java Applications Runtime Settings, drag J2SE 5.0 to the top.

This worked for us.
dponti
 
Posts: 70
Joined: Wed Apr 14, 2004 9:39 pm
Location: Menlo Park, CA

Postby ApeWare » Fri Sep 02, 2005 3:22 pm

Will try this on the one machine...but any suggestions for Jaguar?
User avatar
ApeWare
 
Posts: 114
Joined: Sat Aug 28, 2004 11:49 am
Location: Richmond, VA

Postby Jan Aleman » Sat Sep 03, 2005 11:18 am

Quite strange. Here's what I see on a 10.3.9 box when launching demo.servoy.com:
Attachments
2.2.1rc2.png
Servoy 2.2.1rc2 on 10.3.9 with java 1.4
2.2.1rc2.png (124.07 KiB) Viewed 8936 times
Jan Aleman
Servoy
Jan Aleman
 
Posts: 2083
Joined: Wed Apr 23, 2003 9:49 pm
Location: Planet Earth

Postby Providence1 » Sat Sep 17, 2005 12:33 am

The Editor / DeBugger Doesn't seem to be launching when enabled.

Any one else have this issues on 2.2.1rc2?
Providence
Providence1
 
Posts: 456
Joined: Tue Aug 17, 2004 2:36 am
Location: New York, NY

Postby ApeWare » Mon Sep 19, 2005 6:49 am

I use developer on my PC and I have not had issues with debugger launching. I DO, on occasion, run into an issue where I can not begin writing a script after creating a method. I have to close the method and re-open. Other than that I have not had any other issues with the editor/debugger.
User avatar
ApeWare
 
Posts: 114
Joined: Sat Aug 28, 2004 11:49 am
Location: Richmond, VA

Postby Providence1 » Mon Sep 19, 2005 8:58 pm

Are the Servoy Gods listening?

I'm attempting see if I get the same results on the Mac side of Developer!
Providence
Providence1
 
Posts: 456
Joined: Tue Aug 17, 2004 2:36 am
Location: New York, NY

Next

Return to Latest Releases

Who is online

Users browsing this forum: No registered users and 18 guests