Page 1 of 1

Small Label Layout Adjustment / Printing

PostPosted: Tue Dec 22, 2009 9:59 pm
by pmo
Hello,
I have a Brother 1060 Label Printer and I would like to be able to print a label with 4 inch wide and 2 inch high in portrait mode.
For the life of me, I can't get servoy to set the page layout to portrait.
It always goes to landscape once the width is bigger than the height.
The label printer needs to be able to recognize width = 4 inches portrait mode.
Can we please adjust Servoy so that the developer can control exactly what the layout should be?

My current workaround to this problem is to use a paper size preset selection on the print dialog.
However, since servoy's page setup function does not allow selection of the "preset" preferences on the mac's printing dialog, the end user has to click print 100 times if they were to print 100 labels.

Thanks

Re: Small Label Layout Adjustment / Printing

PostPosted: Mon Jan 04, 2010 12:54 pm
by Andrei Costescu
You are right, the page setup dialog does have this bug (it was meant as a "feature" - but it's no good, as it blocks the possibility of using portrait when width > height).

Please add a case to our Support System to have this fixed:
http://www.servoy.com/s

Thank you.

Re: Small Label Layout Adjustment / Printing

PostPosted: Fri Jan 29, 2010 1:05 pm
by Andrei Costescu
Corrected in Servoy 5.1.