Hello All!
I can use some help with a problem in identifying origins of errors.
Attachment 1 shows the error log from the servoy-admin page. On it, it shows the IP of the connection. This is good information. However,
Attachment 2 shows active connections, however, it logs in from the local IP of the computer they are working on.
So here is the issue: I have no way to map which connected client (192.168.0.2) is located an a Public IP (76.75.74.73) <example>
Can servoy "attach" the two? Can I somehow show that "bob" (internal net ip of 192.168.0.111) is at the main st office ( public ip of 76.75.74.73).
It would really help in identifying where the problem is originating from. All of the offices are using DSL connections through the phone company, and the connection via the phone company's modem is DHCP.
All I can think for doing is remote into each office and grab the public IP with ipchicken.com and keeping the list by the server. The rub is that when power goes out for any reason, that IP will change.
So if anyone has an idea on a better way, I'd really appreciate the suggestions